A scalar field is produced electronically by winding a coil
of wire in one direction and then winding it back on itself in the other direction. So as one part of a wave -form is moving
up through one coil, another part of the wave-form is moving down through the other coil. This collapses the electro-magnetic
field, but doubles the Scalar component (mathematically) and produces our magic. In this state of "no energy" we
have produced a small anomaly in the time/space fabric and it allows us to send information to a distant location (target)
by bypassing the normal means of traveling through time/space.A
simple example of creating a Scalar field is an experiment you can do yourself. Place the palms of your hands together. Now
press equally strongly with both of your left and right hands. Next release the pressure equally on both of your left and
right hands. Repeat this process several times.
This
is basically what we are doing electronically with an electro-magnetic wave.
Under normal circumstances, we would send electrons in one direction at a time to produce some kind of effect at
the other end (like light up a light bulb). Or we might send the electrons first in one direction and then the other direction
to produce a frequency (think radio).
If we applied
this to your hands, you would first press with only your right hand and then as you release the pressure with that hand you
would then press with your left hand. This would produce movement back and forth (frequency). Depending on how quickly you
would press and release, that would determine the frequency. (think Rock Station or Country Western).
But when you press both at the same time and release at the same time, you get no movement
what so ever. (think Scalar).
This is exactly what
happens when we do this electronically. And when there is no movement, there is no measurable electric nor magnetic energy
to speak of. So what is the point if nothing is happening?
The
point is that, even though there isn't any movement, there is "pressure". (which you felt when you did the experiment.)
In electronics we don't have a way to measure the pressure on time/space but we know it exists because of the anomalies that
it produces.
Maxwell described this in his mathematical
equations for electro-magnetism, but because it was so difficult to work with mathematically and also because it didn't seem
to have any use (no movement of electrons = nothing is happening) the scientific community took that part of the equation
out and threw it away. (It was so kind of them to wait until after he died to mess with his divine inspirations).
So in today's school of electricity and magnetics, it is not taught
nor mentioned. But the problem arises when, for example, electronic instruments are tested by themselves but not in the company
of other electronic instruments and when you get several together, strange things happen. For example during Desert Storm,
the air force was about to do a rescue mission and got all of their latest technologies together in one place (which had never
happened before) and everything went haywire. The planes couldn't take off or land, the radar was making up ghosts and the
entire mission never got off the ground (literally).
It
took an old school genius (Tom Bearden) to figure out why everything went defunct. Besides being a nuclear physicist, Tom
is also an expert in Scalar electro-magnetics. He was able to show them where they went wrong in their calculations by adding
back in the missing part of Maxwell's formula. I sometimes think of the Beatles song Maxwell's Silver Hammer when I think
about them taking out that part of the formula. It hurts when it comes back down on their heads.
Next question is of course, What can we do with Scalar fields. I will cover that subject
soon.
Don Paris Ph.D. See Don at www.SE-5.com
